Pairing with the ASAHOM App
Download ASAHOM APP
Download the ASAHOM App from the App Store (iOS) or Google Play (Android).
- Free to use — No charges required
- If you see any charges, you may have downloaded the wrong app
- Scan the QR code below to get the correct version:
Pairing Your Light with the ASAHOM App
What You Need
-
A Wi-Fi router that supports 2.4GHz and 802.11 b/g/n (5GHz is not supported)
-
A smartphone or tablet running iOS 8.0+ or Android 4.3+
-
Before pairing, connect all light sections and plug them in to confirm they work properly
Before Pairing
-
Location
-
Bluetooth
-
Local Network
-
Microphone
-
Wireless Data
How to Pair
- Turn on Bluetooth, and connect your phone to a 2.4GHz Wi-Fi network
- Keep your phone within 5 meters (16.4 ft) of the control box
- Open the ASAHOM App, tap the “+”icon in the top right corner
- The device should appear automatically in the list. lf no device appears within 2 minutes:
- -Press and hold the ON/OFF button on the control box for 5+ seconds
- -The blue indicator light will begin flashing-Return to the app and try again
- Tap the device and follow the on-screen instructions to finish pairing
After entering the device page, please set the correct number of lights.
Notes
Flashing blue light on the control box means it’s in pairing mode
If the light is not flashing, hold the ON/OFF button again for 5 seconds
After pairing, please set the correct number of lights in the app. This ensures the lighting effects work properly across all sections
FAQs
Q1: Why can't the app find my device during scanning?
A1: Make sure your phone is connected to a 2.4GHz Wi-Fi network and Bluetooth is enabled.
Press and hold the controller's ON/OFF button for more than 5 seconds until the blue indicator starts blinking.
A2: What do the blue indicator light statuses mean?
Q2: Blinking blue: Device is in pairing mode.
Solid blue: Device is connected to the network.
No light: Device is powered off or offline.
A3: What should I do if Wi-Fi connection fails during pairing?
Q3: Ensure you are using 2.4GHz Wi-Fi, not 5GHz.
Place the controller close to the router and avoid metal obstacles.
Double-check and re-enter your Wi-Fi name and password.
A4: What if the blue light doesn’t blink?
Q4: Press and hold the ON/OFF button on the controller for more than 5 seconds to enter pairing mode.
Check if the power connection is normal.
