What Is the “Scene” Feature?

The Scene feature allows you to set up automation in your smart home system — enabling multiple devices to work together under a single command or condition.
When you activate a scene (for example, “Home Mode” or “Holiday Lights Mode”), the App automatically performs a series of preset actions across your devices.
Examples:
When you arrive home → outdoor lights turn on + music starts playing + indoor lights change to warm white.
When you leave home → all lights automatically turn off.
When you say “Activate Holiday Mode” → multiple lights start dynamic festive lighting effects.

How It Works in the ASAHOM App

Currently, the ASAHOM App mainly supports the Permanent Outdoor Lights series.
If you only own these products, multi-device automation may not yet be available — however, you can still create basic scenes such as:
1. One-Tap Control for Multiple Devices
If you have several ASAHOM controllers (for example, in different areas),
you can create a “Turn All On” or “Turn All Off” scene to control them at once.
2. Integration with Tuya-Compatible Devices
The ASAHOM App supports some Tuya smart devices.
If you also own Tuya-compatible devices (such as smart plugs or sensors),
you can set up interactive scenes like:
When a door sensor detects the door opening → the outdoor lights automatically turn on.
At sunset → the outdoor lights turn on automatically.

How to Use Launch Tap-to-Run

Step-by-Step Guide
1. Open the ASAHOM App
Launch the ASAHOM App on your smartphone.
2. Go to the “Scene” Section
Tap on the “Scene” tab at the bottom of the App interface.
3. Create a New Scene
Tap “+” (Add) to create a new scene.
Choose “Tap-to-Run” as the scene type.
4. Add Actions
Select the devices and actions you want to include (e.g., turn on outdoor lights, adjust brightness, change color Temp).
You can add multiple actions to make devices work together.
5. Save and Name the Scene
Give your scene a clear name (e.g., Evening Lights, Party Mode, All Off).
Tap “Save” to complete the setup.
6. Launch Tap-to-Run
Go back to the “Scene” page.
Tap your created scene’s icon — the linked devices will immediately execute the preset actions.