Gen 2 Controller

The control box is the central component of ASAHOM Permanent Outdoor Lights. With the control box, you can control your lights remotely and easily create a wide variety of lighting effects, unlocking endless possibilities for your eaves lighting.

Appearance

Gen 2 S1070 Controller

Gen2 S1080 S1090 S2080 Controller

 

Button Functions

  • ON/OFF Button: Press briefly to turn the lights on or off. Press and hold for more than 5 seconds to restore factory settings.
  • M Button: Single press to change model. Press and hold for more than 10 seconds to switch between WLED mode and ASAHOM mode (S1080 series only)

Indicator Light

  • Blinking blue: Device is in pairing mode
  • Solid blue: Device is successfully connected to the network
You can also turn off the indicator light via the app settings

Microphone

  • During installation, make sure not to block the microphone opening to ensure optimal sound pickup.
  • When the Audio Reactive feature is enabled and the device is picking up sound, keep the sound source as close to the microphone as possible for the best lighting response.

External antenna

  • Dramatically improves the stability of the Wi‑Fi connection between the controller and the router, delivering 100% better wireless performance than a traditional built‑in antenna. 
  • When in use, please raise the antenna to a 90° angle, and make sure there are no obstructions around it.

Dual Output

Depending on your installation needs, you can connect light strings to either or both output ports on the controller.
Note: If you are only using one output, make sure to securely tighten the waterproof cap on the unused port to ensure proper waterproofing.
 

Ethernet port (Gen 2 S1080 S2080 Only)

  • Use the included Ethernet cable to connect the controller to the router, eliminating any wireless signal issues and ensuring a stable, long-term network connection.
  • When connecting to the app for the first time, please use a wireless connection. Ethernet cable support is only available after the app connection process is completed.
  • For instructions on how to connect the Ethernet cable, please watch this video: https://youtu.be/59PASdvxBA4

 

FAQs

A1: What do the blue light/indicator statuses mean on the control box?
Q1: Blinking blue: Waiting for Wi-Fi pairing or connection;
Solid blue: Device is connected to the network;
No light: Device is powered off or malfunctioning.

A2: How do I pair the control box with the mobile app?
Q2: Press and hold the pairing button (usually the ON/OFF button) for more than 5 seconds until the blue light blinks. Then, add the device in the app and follow the instructions to complete pairing.

A3: What if the control box cannot connect to Wi-Fi or the indicator does not light up?
Q3: Check if the power supply and outlet are working properly.
Try restarting the control box; reset and re-pair if necessary.

A4: What should I do if the control box is damaged？
Q4: Disconnect the power immediately and stop using it. Contact customer service for repair or replacement.

Updated on 29 Sep 2026

Gen 2 Light string extension cord